Bolex Paillard D8L 8mm Camera with 3 lenses **Untested**
Rated 3.5/5 based on 11 customer reviews

Bolex Paillard D8L 8mm Camera with 3 lenses **Untested**

Available: In Stock
£119.99

Item Location

This item is available for Collection or Delivery from:
Cash Generator Kirkby, 16 St Chads Parade, Kirkby, Merseyside, L32 8RH
Email: Kirkby@cashgenerator.co.uk
Telephone: 01515462824

Item Condition

Condition: Pre-Owned: Grade B
Really Good Condition considering the age, with carry case.

Item Description

About the Bolex Paillard D8L Double 8mm Camera OVERALL DIMENSIONS: 5″ x 3 1/2″ x 2″ WEIGHT: Approximately 28 oz. OUTER CASE: Highly polished duraluminium body, covered in genuine Morocco leather. Metal parts are chrome-plated FILM CAPACITY: 25ft daylight loading spools of double run 8mm film. When a roll runs through the camera, only half the width of film is exposed. The spool is then reversed and run through again, exposing the other half. When processed, film is split and spliced together giving 50′ for projection. Projection time at 16 fps for 25′ roll is 4 minutes. THREADING: manual, with no loop forming; with the pressure pad opened the film is simply placed over a guide roller, threaded behind the gate, over the bottom guide roller and onto the takeup spool MOTOR: Constant speed, spring motor mechanism; governor controlled. Generous winding key, attached to the camera, folds back against its side when not in use. Spring cannot be over-wound. TURRET: Accommodates three standard D mount lenses. VIEWFINDER: optical type; adjustable dial shows the scene as viewed by focal lengths of 12.5mm, 25mm and 36mm. Accessory prism attachments allow for filming with 5.5mm lenses, and for parallax correction while filming at close distances. VARIABLE SPEED: 12, 16, 18, 24, 32, 48 and 64 frames per second. RELEASE BUTTON: continuous exposures can be made by a finger tip release button or cable release. Running operation can be locked to prevent accidental exposures, or set for continuous hands-free filming. VARIABLE SHUTTER: Adjustable dial changes the shutter opening from 0-165 degrees to allow for shortened exposure times and fades. FOOTAGE COUNTER: Precise reading of exposed film footage. Audible end-of-film signal. Resets to zero upon reloading. SINGLE FRAME: A cable release socket allows the user to expose single frames for filming animation, titles, etc. EXPOSURE METER: A photoelectric cell measures light through the lens. Two needle indicators in the viewfinder are then aligned by adjusting the diaphragm on your lens, resulting in proper exposure. TRIPOD SOCKET: 1/4″ thread Designed for the serious 8mm movie photo fan, the new Bolex “Compumatic” DSL combines camera all the versatility required and demanded by the one most exacting user. The zoom-type view finder has engraved fields of view for standard and telephoto sighting, and the governor controlled motor can be adjusted to seven different filming speeds, from 12 to 64 frames per second. The true variable blade shutter, first introduced in the twin-lens turret “Compumatic” B “BBL, enables the user to do professional quality fade-ins and fade-outs right in the camera. A wide choice of Kern and Som Berthiot “D” mount prime lenses are available for the D8L camera.

Item Location

This item is available for Collection or Delivery from:
Cash Generator Kirkby, 16 St Chads Parade, Kirkby, Merseyside, L32 8RH
Email: Kirkby@cashgenerator.co.uk
Telephone: 01515462824

Item Condition

Condition: Pre-Owned: Grade B
Really Good Condition considering the age, with carry case.

Item Description

About the Bolex Paillard D8L Double 8mm Camera OVERALL DIMENSIONS: 5″ x 3 1/2″ x 2″ WEIGHT: Approximately 28 oz. OUTER CASE: Highly polished duraluminium body, covered in genuine Morocco leather. Metal parts are chrome-plated FILM CAPACITY: 25ft daylight loading spools of double run 8mm film. When a roll runs through the camera, only half the width of film is exposed. The spool is then reversed and run through again, exposing the other half. When processed, film is split and spliced together giving 50′ for projection. Projection time at 16 fps for 25′ roll is 4 minutes. THREADING: manual, with no loop forming; with the pressure pad opened the film is simply placed over a guide roller, threaded behind the gate, over the bottom guide roller and onto the takeup spool MOTOR: Constant speed, spring motor mechanism; governor controlled. Generous winding key, attached to the camera, folds back against its side when not in use. Spring cannot be over-wound. TURRET: Accommodates three standard D mount lenses. VIEWFINDER: optical type; adjustable dial shows the scene as viewed by focal lengths of 12.5mm, 25mm and 36mm. Accessory prism attachments allow for filming with 5.5mm lenses, and for parallax correction while filming at close distances. VARIABLE SPEED: 12, 16, 18, 24, 32, 48 and 64 frames per second. RELEASE BUTTON: continuous exposures can be made by a finger tip release button or cable release. Running operation can be locked to prevent accidental exposures, or set for continuous hands-free filming. VARIABLE SHUTTER: Adjustable dial changes the shutter opening from 0-165 degrees to allow for shortened exposure times and fades. FOOTAGE COUNTER: Precise reading of exposed film footage. Audible end-of-film signal. Resets to zero upon reloading. SINGLE FRAME: A cable release socket allows the user to expose single frames for filming animation, titles, etc. EXPOSURE METER: A photoelectric cell measures light through the lens. Two needle indicators in the viewfinder are then aligned by adjusting the diaphragm on your lens, resulting in proper exposure. TRIPOD SOCKET: 1/4″ thread Designed for the serious 8mm movie photo fan, the new Bolex “Compumatic” DSL combines camera all the versatility required and demanded by the one most exacting user. The zoom-type view finder has engraved fields of view for standard and telephoto sighting, and the governor controlled motor can be adjusted to seven different filming speeds, from 12 to 64 frames per second. The true variable blade shutter, first introduced in the twin-lens turret “Compumatic” B “BBL, enables the user to do professional quality fade-ins and fade-outs right in the camera. A wide choice of Kern and Som Berthiot “D” mount prime lenses are available for the D8L camera.

All items marked as available for delivery include free standard UK mainland delivery. Please note that some couriers exclude northern Scotland from this definition. The selling store shall contact you on receipt of your order should an additional charge apply. 

Seasonal demand fluctuations may affect dispatch and delivery times.

Click & Collect: All items available for click and collect can only be collected from the store selling the product. This location is shown above the main item description. Click on the store name for the full store information.

Our Refunds & Returns policy can be found here.

Brand New     

The item has never been used and is in original packaging. Where applicable factory seal still intact.

New Other     

The item has only been unwrapped from new in-store for testing and is in perfect condition.

Refurbished

Grade A - Very Good. The item will show only very slight signs of use.

Grade B - Good. The item will show small signs of wear including small scratches.

Grade C - Acceptable. The item will show signs of extended use including scratches, dents and scuffs.

Pre-Owned

Grade A - Like New. The item looks unused and in perfect condition to the naked eye from 12 inches.

Grade B - Very Good. A well looked after item that has had limited use and remains in great condition. The item will show some light signs of wear which may include very small scratches.

Grade C - Good. The item shows wear from use but remains in good condition. This may include small scratches.

Grade D - Acceptable. The item is fairly worn. The signs of wear can include scratches, dents and scuffs. 

Grade F - Faulty. An item that is not fully working, any faults and aesthetic condition will be in the description.

PRODUCT IMAGES.

All products are pre-owned unless specifically stated otherwise. Images are for illustrative purposes only and may not represent the actual product.