Megger - MIT220 Electrical Tester
Item Location
This item is available for Collection or Delivery from:
Cash Generator Blackburn, 27 King William Street, Blackburn, BB1 7DJ
Email: blackburn@cashgenerator.co.uk
Telephone: 01254268500
Item Condition
Condition: Pre-Owned: Grade B
In good boxed with leads
Item Description
The Megger MIT200 series digital/analogue handheld insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing metre provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analogue arc function to replicate the response of analogue metres. The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms. A continuity buzzer indicates continuity of 2 ohms or less. The unit has a test inhibit function that prevents testing on circuits carrying over 50V. The tester is safety rated to Ingress Protection 40 (IP40) for protection against accidental contact with hazardous parts, and to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger MIT200 series is commonly used by electricians and electrical contractors. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Electrical test metres report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the metre to a circuit or device. Single-function metres, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test metres display information either in analogue form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Metres have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test metre has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging metre requires the operator to flip through different settings until the correct range is reached. An autoranging metre cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organisation for Standardisation (ISO) 9001:2008 standards.
Item Location
This item is available for Collection or Delivery from:
Cash Generator Blackburn, 27 King William Street, Blackburn, BB1 7DJ
Email: blackburn@cashgenerator.co.uk
Telephone: 01254268500
Item Condition
Condition: Pre-Owned: Grade B
In good boxed with leads
Item Description
The Megger MIT200 series digital/analogue handheld insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing metre provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analogue arc function to replicate the response of analogue metres. The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms. A continuity buzzer indicates continuity of 2 ohms or less. The unit has a test inhibit function that prevents testing on circuits carrying over 50V. The tester is safety rated to Ingress Protection 40 (IP40) for protection against accidental contact with hazardous parts, and to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger MIT200 series is commonly used by electricians and electrical contractors. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Electrical test metres report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the metre to a circuit or device. Single-function metres, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test metres display information either in analogue form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Metres have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test metre has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging metre requires the operator to flip through different settings until the correct range is reached. An autoranging metre cycles through range settings automatically until it reaches the correct range. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organisation for Standardisation (ISO) 9001:2008 standards.
All items marked as available for delivery include free standard UK mainland delivery. Please note that some couriers exclude northern Scotland from this definition. The selling store shall contact you on receipt of your order should an additional charge apply.
Seasonal demand fluctuations may affect dispatch and delivery times.
Click & Collect: All items available for click and collect can only be collected from the store selling the product. This location is shown above the main item description. Click on the store name for the full store information.
Our Refunds & Returns policy can be found here.
Brand New
The item has never been used and is in original packaging. Where applicable factory seal still intact.
New Other
The item has only been unwrapped from new in-store for testing and is in perfect condition.
Refurbished
Grade A - Very Good. The item will show only very slight signs of use.
Grade B - Good. The item will show small signs of wear including small scratches.
Grade C - Acceptable. The item will show signs of extended use including scratches, dents and scuffs.
Pre-Owned
Grade A - Like New. The item looks unused and in perfect condition to the naked eye from 12 inches.
Grade B - Very Good. A well looked after item that has had limited use and remains in great condition. The item will show some light signs of wear which may include very small scratches.
Grade C - Good. The item shows wear from use but remains in good condition. This may include small scratches.
Grade D - Acceptable. The item is fairly worn. The signs of wear can include scratches, dents and scuffs.
Grade F - Faulty. An item that is not fully working, any faults and aesthetic condition will be in the description.
PRODUCT IMAGES.
All products are pre-owned unless specifically stated otherwise. Images are for illustrative purposes only and may not represent the actual product.